USB Powered Speakers
These USB-powered speakers are ideal for use with the Raspberry Pi 2/3/4. Just plug the USB connector into one of your Pi's USB ports, then pop the 3.5mm jack in to pass audio from your Pi to the speakers.
Not compatible with Raspberry Pi 5 (it doesn't have a 3.5mm audio port).
With two speakers offering 3W RMS, these pack a decent punch considering they're only USB powered. They use around 0.5A at loud volumes, but if you crank them right up they can peak out at around 800ma-1A.
The wire also has a volume control (or just adjust the volume via Raspberry Pi OS).
These aren't exclusive to the Pi either; use them on your PC or any other device with a USB port and a 3.5mm jack output (you can even power them via a power bank for use with your phone or another mobile device).
Specifications
- Power: 5V (USB)
- peak current usage: 500-1000mA
- Output: 3W x2 RMS
- Sensitivity: 500mV
- Frequency response: 20Hz - 18KHz
- Impendance: 4 ohms
- Speaker size: 52mm
- Dimensions: 102mm x 65mm x 70mm
These USB-powered speakers are ideal for use with the Raspberry Pi 2/3/4. Just plug the USB connector into one of your Pi's USB ports, then pop the 3.5mm jack in to pass audio from your Pi to the speakers.
Not compatible with Raspberry Pi 5 (it doesn't have a 3.5mm audio port).
With two speakers offering 3W RMS, these pack a decent punch considering they're only USB powered. They use around 0.5A at loud volumes, but if you crank them right up they can peak out at around 800ma-1A.
The wire also has a volume control (or just adjust the volume via Raspberry Pi OS).
These aren't exclusive to the Pi either; use them on your PC or any other device with a USB port and a 3.5mm jack output (you can even power them via a power bank for use with your phone or another mobile device).
Specifications
- Power: 5V (USB)
- peak current usage: 500-1000mA
- Output: 3W x2 RMS
- Sensitivity: 500mV
- Frequency response: 20Hz - 18KHz
- Impendance: 4 ohms
- Speaker size: 52mm
- Dimensions: 102mm x 65mm x 70mm
Original: $8.70
-65%$8.70
$3.04Description
These USB-powered speakers are ideal for use with the Raspberry Pi 2/3/4. Just plug the USB connector into one of your Pi's USB ports, then pop the 3.5mm jack in to pass audio from your Pi to the speakers.
Not compatible with Raspberry Pi 5 (it doesn't have a 3.5mm audio port).
With two speakers offering 3W RMS, these pack a decent punch considering they're only USB powered. They use around 0.5A at loud volumes, but if you crank them right up they can peak out at around 800ma-1A.
The wire also has a volume control (or just adjust the volume via Raspberry Pi OS).
These aren't exclusive to the Pi either; use them on your PC or any other device with a USB port and a 3.5mm jack output (you can even power them via a power bank for use with your phone or another mobile device).
Specifications
- Power: 5V (USB)
- peak current usage: 500-1000mA
- Output: 3W x2 RMS
- Sensitivity: 500mV
- Frequency response: 20Hz - 18KHz
- Impendance: 4 ohms
- Speaker size: 52mm
- Dimensions: 102mm x 65mm x 70mm
